Hangzhou surface grinder mainly uses the grinding wheel to rotate and grind the workpiece to achieve the required flatness. According to the shape of the worktable, it can be divided into two types: rectangular worktable and circular worktable. The main parameters of the rectangular worktable surface grinder are the width and length of the worktable, and the main parameter of the circular table surface grinder is the diameter of the worktable. In the specific operation process, Hangzhou surface grinder should pay special attention to 7 major structures.

In addition to the movement space, the Hangzhou surface grinder needs to reserve more than 300 mm, and each bracket screw must be tightened, and the front, rear and left and right levels of the table are within 0.04/1000 mm. (The requirements for installing the inverter should be higher) Check it every three months, adjust the level of the workbench, and tighten the screws at the bottom ends.

Hangzhou surface grinder is a kind of grinder. The workpiece is polished primarily by rotation with a grinding wheel to obtain the desired flatness. According to the shape of the table of Hangzhou surface grinder, it can be divided into two types: rectangular table and round table. The main parameters of the rectangular table surface grinder are the table width and length, and the main parameter of the circular table is the table diameter. Grinders can be divided into horizontal axis and vertical axis along the axis. For example, M7432 vertical axis circular table plane grinder, 4080 axis torque table plane grinder.