Hangzhou surface grinder mainly uses the grinding wheel to rotate and grind the workpiece to achieve the required flatness. According to the shape of the worktable, it can be divided into two types: rectangular worktable and circular worktable. The main parameters of the rectangular worktable surface grinder are the width and length of the worktable, and the main parameter of the circular table surface grinder is the diameter of the worktable. In the specific operation process, Hangzhou surface grinder should pay special attention to 7 major structures.

  1.targeting rules

  Where should the machine tool be placed, and how to install it better? It is understood that more than 300mm should be reserved outside the maximum movement space, each foot screw should be tightened, and the level of the front and rear of the table should be within 0.04/1000 mm (the installation of inverters requires higher requirements). )

  2.Choice of grinding wheel

  The selected grinding wheel must be able to withstand the rotation speed of more than 2000 m/min, because the rotation speed is too low and it is easy to leave marks, but the rotation speed is too high, the price of the grinding wheel will be much higher. In addition, special attention should be paid to strictly prohibit the use of damaged grinding wheels. If conditions permit, flanges can be made after a new grinding wheel is installed and must be balanced. Hangzhou surface grinder

  3.Grinder spindle, make sure the spindle rotates clockwise before installation.

  4.hydraulic device

  The surface grinder uses hydraulic oil with a viscosity of 46 #. After the new machine has been used for three months, the hydraulic oil needs to be replaced. After that, replace it once a year and clean the fuel tank. Hangzhou surface grinder

  5.Lubrication device

  Use 32 viscosity guide oil. It is recommended that Mavida No. 1 or No. 1405), confirm the oil level of the fuel tank (pool) every day, and ensure that it is above the offline level. Check the oil passage of the guide rail once a week to prevent oil leakage from the guide rail. It is recommended to clean the fuel tank every three months. Grease regularly as needed.

  6.left and right institutions

  When the table is moving, it is forbidden to adjust the left and right strokes. When the worktable wire rope is loose, it should be adjusted immediately.

  7.Flushing and Vacuuming Devices

  The cleaning and maintenance of the filter screen of the vacuum box should be cleaned every two weeks. The other is the inspection of the coolant. Generally, when the coolant is polluted, it should be checked and removed in time. Hangzhou surface grinder

  In fact, Hangzhou surface grinder is the machine tool with the greatest development potential among the grinder machine tools.

  In addition to the traditional surface grinding function, on the basis of the surface grinding of large parts such as bed, carriage, table, grinding head, etc., it can also evolve into a cylindrical, curved, tool, centerless and other grinding machines.

  Modular design will be a main line running through the whole process of product design, whether it is the trend of machine tool technology development or the requirements of market competition; whether it is the need to reduce costs or improve product quality, we are required to be in future product development and design. Do a good job of modular design.

  The basic point of the development of Hangzhou surface grinder industry is the development of design innovation concepts. The traditional metal cutting principle, with a new modern design concept, combined with advanced control technology, is driving a major change in machine tool technology.