1. Safety before operation: For this requirement, operators must do a good job of pre-job training, because everything is difficult at the beginning. If there are potential safety hazards at the beginning, there will be more problems in the later process. Regarding the safety inspection content at this time, there are mainly three aspects, one is the inspection of the operating space, the other is the inspection of the safety state of the power supply circuit, and the other is the safety inspection of the mechanical equipment.

  2、Operation safety: During the operation and use of the wire cutting machine, the east and west electrodes and the electrode strip will be electrically connected, and direct contact with electricity will affect the operator. In order to avoid this situation, it is necessary to cover all parts of the protective cover during processing. Well, write the program according to the specific conditions of the part design requirements, consider the clamping method of the workpiece during the programming process, and also consider the selection of the diameter of the electrode wire, which can ensure safe production.

  3、Safety after operation: After the work is completed, the relevant staff must first cut off the power supply, then wipe the equipment part of the wire cutting machine with a soft cloth, then cover the cloth cover specially used to cover the machine, and finally clean the ground. Do not leave a series of marks on the pulleys or rolling areas of the machine, which must be wiped clean with a rag. Finally, make a record of the work, hand it over to the next worker in time, and then close the doors and windows and lock them.

  4、Safety requirements for operators: For operators of wire cutting machines, in order to achieve safe production, there are also certain safety requirements. First of all, such operators must hold certificates and undergo pre-job safety training. Operators must be very familiar with the mechanical operation procedures. For large mechanical equipment such as wire cutting machine tools, they need to have a deeper understanding of safety issues.

  Wire cutting process goal: To improve the shape accuracy, the straightness of the cutting surface is required to be small, that is, the processing surface should be uniform and smooth, and the straightness should be small.