When it comes to surface grinder machine tools, people think it is the kind of machine tool that grinds flat. The development trend of surface grinders in the world has changed in the past. Nowadays, the development trend of surface grinders is to turn to forming, step, plunge, fast vibration, and three-dimensional space curve surface grinding. It can be said that flat grinding is a type of grinding machine with great potential for evolution.

  Different surface grinder products and equipment will present a lot of problems in the application from time to time, so along with the problem solving, the products are also being upgraded from time to time. a model. In order to ensure that the surface grinder can better complete the work in normal work, so for the operator, the use of the surface grinder needs to pay attention to many problems.

  Pad elastic gasket clamping method When grinding the above-mentioned thin workpiece on the surface grinder, an elastic clamping mechanism is used to complete the positioning and clamping of the thin workpiece in a free state. A layer of rubber with a thickness of 0.5mm is placed between the workpiece and the magnetic table. When the workpiece is affected by the magnetic absorption force, the rubber is compressed and the elastic deformation becomes smaller, so that the flat surface of the workpiece can be ground. Repeat grinding several times to meet the machining accuracy requirements.

  Temporary measures are used to enhance the rigidity of the sheet workpiece. The epoxy resin release agent is used to bond the sheet workpiece to a flat plate in a free state. The plate is placed on the magnetic chuck together with the sheet. After grinding one end of the sheet, the sheet workpiece is removed from the flat plate, and the flat side is placed on the magnetic chuck, and then the other end of the sheet is ground. Because the epoxy is mobile until it hardens, it fills the gap between the thin workpiece and the plate.